Do you want more performance out of your 2015-2019 Carrera GTS or Carrera 4 GTS or change up the overall aesthetic of the car with a new set of wheels? Look no further than this Porsche 911 991 GTS Wheel & Tire Fitment Guide. We have the fitment information you need to best suit your needs and use case all while decreasing rotational and unsprung mass. We are shedding this weight with a set of Forged VS-5RS and EC-7RS while increasing wheel width providing even more sidewall support to extract even more performance. Unlock the full potential of your GTS with a set of Apex wheels in a fitment below.
Brake Clearance Information
In the engineering phase of wheel development we 3D scan factory brakes and review 2D aftermarket brake templates in order to optimize our barrel profiles and spoke curvatures. As a result, our wheels offer massive brake clearance so you can run the smallest possible wheel diameter.
* The factory 6 piston 410mm PCCBs require 20" wheels for proper clearance. Read our article for more info.
Rear Axle Steering (RAS) Clearance
All 19" and 20" APEX wheels are optimized to clear rear axle steering (images at bottom of guide).
Bolt Pattern
5x130
Center Bore
71.6mm
Lug Seat
R14 Ball Seat
Thread Pitch
M14x1.5mm
Wider fitments for enhanced performance
Our most popular fitments for the 991 Carrera GTS, suitable for those weekend drives or occasional track day. A great way to reduce unsprung mass, increase wheel and tire width. These are generally bolt on solutions but some tire configurations could require light suspension or alignment modifications.
Rear Axle Steering Clearance Images With 19" Wheels
We have tested many brake kits with the wheels listed in this guide. Please email us with any questions related to brake clearance, we’ll be happy to help.
Fill out our Fitment Recommendation form Call us: 925-245-0773 Email us: support@apexraceparts.com