Fitment guide

Dodge Challenger Widebody Wheel & Tire Fitment Guide

Originally published | 03/17/2023
Updated | 03/07/2024

Vehicle Covered in this Guide

2019 - Current Dodge Challenger Widebody (all submodels)

Brake Clearance Information

All wheels listed will clear all known factory and aftermarket brake setups

Available Wheel Designs

Forged Designs

Bolt Pattern

5x115mm

Center Bore

71.6mm

Lug Seat

60° Conical

Thread Pitch

M14x1.5mm

Performance Street and Track Wheel Fitment

Wider fitments for enhanced performance

  • Purple Dodge Challenger - VS-5RS in Anthracite
  • Purple Dodge Challenger - VS-5RS in Satin Bronze
  • Green Dodge Challenger - VS-5RS in Satin Bronze
  • Green Dodge Challenger - VS-5RS in Anthracite
  • White Dodge Challenger - VS-5RS in Anthracite

Whether you enjoy spirited street driving or you're a weekend track warrior chasing lap times, these wheel & tire configurations are ideal for Dodge owners looking for a more dramatic improvement in performance. They are typically paired with performance oriented summer tires or track oriented R-compounds and this category includes both staggered and square configurations to best suit each individual drivers priorities, goals and preferences for their vehicle.

We've optimized the offset of our wheels to work well with the stock fenders, however certain tire compounds may require negative camber to fit properly. See fitment notes under each tire configuration below to see if modifications are required. If you plan to track your Mopar, we highly recommend dialing in negative camber regardless of whether your wheel/tire fitment requires it for fender clearance. Negative camber is vital for extracting the most performance and longevity out of your tires on track, and without the proper amount the outer shoulders of your tires will wear out prematurely and running tire costs will dramatically increase. These small amounts of negative camber will not have a noticeable effect on tread life for street use.

Wheels 

Front Wheel Size: 20x11.5" ET3 Rear Wheel Size: 20x11.5" ET3

  • Available in: VS-5RS

Tires

APEX Staff Pick Front Tire Size: 315/35-20 Rear Tire Size: 315/35-20

  • Direct Fit
  • Performance All Season: Michelin AS4 (540TW), Continental DWS06 Plus (560TW)
  • Performance Summer: Michelin PS4S (300TW), Continental Extreme Sport 02 (340TW), Bridgestone Potenza Sport (300TW), Pirelli PZero PZ4 (220TW), Falken FK510 (300TW), Nitto NT555 G2 (320TW)
  • Extreme Performance/Drag: Michelin Cup2 R (140TW), X-Comp H/P (200TW), Atturo AD850DR (100TW), Nitto NT555RII (100TW), Nitto NT05 (200TW) Narrower Alternative Front Tire Size: 305/35-20 Rear Tire Size: 305/35-20
  • Direct Fit
  • Performance All Season: Michelin AS4 (540TW), Continental DWS06 Plus (560TW)
  • Performance Summer: Michelin PS4S (300TW), Continental Extreme Sport 02 (340TW), Bridgestone Potenza Sport (300TW), Pirelli PZero PZ4 (220TW), Falken FK510 (300TW), Nitto NT555 G2 (320TW)
  • Extreme Performance/Drag: Goodyear Supercar 3 (220TW), Michelin Cup2 R (140TW), Nitto NT555RII (100TW), Toyo R888R (100TW) Wider Alternative: Front Tire Size: 325/30-20 Rear Tire Size: 325/30-20
  • 1/4" front spacer required
  • Performance alignment suggested
  • Performance Summer: Michelin Sport Cup2 (180TW), Nankang CR-S (200TW)
  • R-Compound: Toyo RR (40TW), Toyo R888R (100TW)

Additional Resources

Whether you are a casual weekend track warrior that still enjoys your car on the street, or a hard core racer competing for a spot on the podium, negative camber is a vital part of chassis setup that has many benefits. Not only will adding negative camber create more room for wider wheel and tire configurations, it more importantly improves handling, turn-in and tire longevity. Learn more in our blog article, The Positives of Negative Camber.

Still have questions?

Fill out our Fitment Recommendation form Call us: 925-245-0773 Email us: support@apexraceparts.com